Battery Chargers for all types of specialty applications: Select: 12 Volt Battery Chargers 24 Volt Battery Chargers Custom Designs The Ultimate Battery Charger   If you don't see it here, we're sure we have it. Fill in the online Information Form so we can fill your request or send us an E-mail:

BusPro-600s Smart Six-Station Automated Battery Charger 6 independent charging stations Connect up to three BusPro-600s together Charging output per station 5 Amps Lights indicate Defective Battery, Charging, Maintaining and Improper Connections Removes sulfation by means of a micro controlled current pulse Maintenance output per station 13.2 Volts with 0 to 2.5 Amp variation as needed 115 VAC BusPro-600s 115 Volt Input BusPro-620s 220 Volt Input (without plug - attach required type) Micro controllers Each of 6 stations are  independently controlled  Over charging Each controller prevents over charging Sulfating Each controller removes sulfating automatically Charge Mode 5 Amps per station Maintenance Mode 13.1 Volts with 0 to 2.5 Amp variation as needed Temperature  0° to 120° F. Humidity  0 to 85% non condensing Red LED only  One per station ' Steady' for Charging - 'Defective Battery' if flashing' Green LED only One per station indicates 'Charged and Maintaining' ready for load test Red & Green LEDs on Indicates 'Topping of Battery' Error  No lights indicate improper polarity or connection Power  AC power  Clamp Leads 6 ft. 18 GA.   Expansion Up to 3 BusPro units can be hooked together Capacity Optional AC-8 lead sets can charge 6 additional batteries. This reduces the  Amps per station to 2 1/2. This works well for motorcycle batteries. Size 3" x 8" x 36" Shipping Weight 31 lbs. Back to the Top XTC-150 Speed and Accuracy with Automated Battery Test and Charge LCD with back light - 1" x 2.5" (4 line x 16 character) Tests and charges 12 Volt batteries from 200 to 1200 CCA Charges the battery automatically LED Indicators - "TESTING", "GOOD", "MARGINAL", and "BAD". During the automatic charge sequence the LED's indicate, "CHARGING", "CHARGED" and "MAX. MINUTES TO CHARGE" for distance viewing Stores the last 100 tests in memory for review, print and PC downloadobe Tests  Battery Check and Load Test   Load Sequence Automated variable 200 Amp peak load resistive ribbon Charge Sequence Time 5 to 30 min. Larger discharged batteries may be longer. Temperature  0° to 120° F. Humidity  0 to 85% non condensing Battery Load Sizes  200 to 1200 CCA and 250 to 1500 CA Key Pad  Chemical Resistant lexan covered tactile switch Display 1" x 2.5" 4 line x 16 character LCD for menus and displaying test results Menu Key Entry 4 Keys (+Up) (-Down) (Y Enter) (N Esc) Led Indicators Testing, Good, Marginal, Bad, Charging, Charged and Max. Minutes to Charge Cooling  5" Internal vented Fan Power  AC power switch  Test Sequences Computerized and automated.  Load Clamps 8 ft. cable  #6 Aug. 800 Amp rating Kelvin connection Red and Black Memory Holds the last 100 Tests for printing and downloading to a PC PC Adaptor Optional AC-11 PC Null Modem Serial Cable Printer Optional AC-14 Internal printer with 58-mm roll Easy installation and roll replacement Size 13" x 11" x 9.25" Weight 42.75 lbs. The Ultimate Automatic Battery Charger Set and Forget Chargers   Fully automatic Shutdown / Restart Built in Handle Easy to Understand LED Indicators Reverse Polarity Protection High Impact. Thermoplastic Outer Shell Safer Case Design Convenient Clips Lightweight Design 12 Volt Battery Chargers

6 Amp Linear OEM-0012061 12 VOLT - 6 AMP: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Golf caddies and scooters among others.  More information and specs on the 0012061 10 Amp Linear charger OEM-0012103 12 VOLT - 10 AMP: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial and OEM applications such as Marine, Utility vehicles and Material Handling among others. More information and specs on the 01208 Back to the Top

24 Volt Battery Chargers

1.5 Linear Charger OEM-002401.5 24 VOLT - 1.5 AMP: Fully Automatic two-stage battery charger, UL and CSA approved, Dual Mode (for gel/sealed and wet batteries). Specially designed for Industrial and OEM applications such as Mobility aids, wheelchairs, scooters and electric bicycles among others. More information and specs on the OEM-02401.5 3 Amp Linear Charger OEM-0024031 24 VOLT - 3 AMP: Fully Automatic two-stage battery charger, UL and CSA approved. Specially designed for Industrial Battery maintenance, OEM applications such as Wheelchairs and Scooters among many other things.  More information and specs on the OEM-0024031 5 Amp Linear Charger OEM-0024054 24 VOLT - 5 AMP: Fully Automatic two-stage battery charger, UL and CSA approved, Dual Mode (for gel/sealed and wet batteries). Specially designed for Industrial and OEM applications such as Mobility aids, wheelchairs, scooters and electric bicycles among others. For more information and specs on the OEM-0024054 click here   Back to the Top

Custom Designs

Custom Designs MULTI-STAGE CUSTOM MICROPROCESSOR BASED MULTI-CHEMISTRY INTELLIGENT BATTERY CHARGER MODULES For more information on Custom Designed Battery Chargers click   here Back to the Top

Back to the Top

 

 

 

Simply put, there can be too many variables when specifying a battery to do it all online.
We offer TOLL FREE access so you can get what you need ... THE FIRST TIME
Don't Be Disappointed - Be Satisfied

Call GNB Systems
Toll Free: 1-877-549-4454

70 Years of Experience working for YOU!

Copyright© GNB Systems 1997 - 2006 Privacy/Security Statement

Secure Order Page

Great Northern Battery Systems & ACME Battery Co. Ltd.
475 Parkdale Avenue N. Hamilton, Ontario, Canada L8H 5Y4
ph: 905 549 4454 toll free: 1.877.549.4454 fax: 905 549 1679
email: sales@absolutebattery.com

website updated June 28, 2006